Wasp & Yellowjacket Control
Bee Control
Fly Bait Strips
Attractant Fly Trap
Attractant Yellowjacket
Sticky Fly Trap (Inside/ Outside Trap)
Vapor Fly Strips  (Inside/ Outside Control)
Maxforce Granular Fly Bait
Liquid Spray
Mosquito Repellents
Honey Bee Trap
Bug and Fly Ribbon (Fly Paper) (Inside/ Outside Trap)
Maxforce Fly Spot Bait (Inside/ Outside Control)

Drain Fly Treatments
Septic Tank Treatments
Electrocuting Fly Traps
Glueboard Fly Traps
Gnat Trap
Moth Control
Fruit Fly Trap
Cluster Fly Trap
House Fly Trap and Face Fly
Aerosol Dispensers
Window Fly Trap

Drain Fly Facts and Key Inspection Tips

Check out this must have product for Commercial Kitchens

DF 5000 for Drain Flies & Sewer Flies ENVIROPRO - DF 5000 Ultra-Strength Drain Treatment to Prevent and eliminate Drain Flies & Sewer Flies. Drain flies & Sewer Flies are a common, Major health hazard. These small insects closely resemble fruit flies and breed in the decaying organic matter typically found in "J" traps or floor and sink drains. Drain flies & sewer flies cannot be eliminated unless you remove their food source and egg laying environment. DF 5000 is an exclusive, highly concentrated gel that clings to pipes and traps to rapidly attack and destroy the organic matter that supports drain fly & sewer fly development. Regular use of DF 5000 will prevent drain flies & sewer flies and eliminate their ability to reproduce if they are already present. ARE THE DRAIN FLIES REALLY DRAIN FLIES??   MSDS 2 (1qt. Bottles) @ $35.65 ea. FREE SHIPPING 4 (1qt. Bottles) @ $62.00 ea.  FREE SHIPPING 6 (1qt. Bottles) @ $90.00 ea.  FREE SHIPPING 9 (1qt. Bottles) @ $124.00 ea.  FREE SHIPPING 12 (1qt. Bottles) @ $157.96 ea.  FREE SHIPPING Enhance your Drain Fly Killing Program. Use our new Wall Outlet Fly Traps & DF 5000 at the same time. This will double your Kill & Catch ratio. This companion item can be purchased in a KIT at check out FOR A LIMITED TIME "FREE SHIPPING" TO ALL STATES EXCEPT HAWAII & ALASKA (Any special shipping request will void the free shipping) We only ship USA Shop now and don't pay a dime to get it there Go here to check out the new  Wall Outlet Fly Trap Case Rates: Contact us for Multiple Case Rates of DF 5000

Drain Fly Facts and Key Inspection Tips Special formula digests organic masses with a highly selective active bacteria complex  Contains no insecticides or poisons and may be used in food service drains Will not damage plumbing

Bacterial Formulation for General Cleaning and Removal of Organic Material

Restaurants and other food preparation facilities often experience sanitation problems associated with the buildup of kitchen grease (organic waste) on floors, in drains, and under heavy equipment. These problems include fruit and drain fly infestations, slippery floor surfaces, foul odors, and clogged (slow) drains. Mopping with standard floor cleaning products, or hosing/power washing with water only, does not remove grease and organic waste - it only breaks it up pushing it into drains and under equipment where it accumulates. 

New formula BioMop™ is a state-of-the-art floor cleaner combined with a highly concentrated biological degrader. The biological component consists of Bacillus-family microorganisms including MGD™ (Microbial Grease Degrader), a patent-pending strain that breaks down long chain fatty acids - the primary component of problem grease deposits. BioMop™ quickly penetrates porous floor surfaces and digests grease that accumulates over time. It also inhibits foul odors caused by rancid or anaerobic environments. BioMop™ cleans the floor and removes organic waste - all in one step.

BioMop™ can be applied by mopping or hosing. For mopping add 2 oz. to 1-gallon water and mop in the usual manner (treat drains by pouring the unused mop water into each drain). To apply by hosing use the BioMop Hose End Sprayer.

Characteristics

Storage and Handling
Store in cool, dry place. Avoid inhalation, wash hands after contact, and avoid eye contact.
Availability
128 Fl Oz (1 Gallon) 3.79L Bottles - 4 Bottles Per Case

Cost Per Gal. $44.95 FREE SHIPPING
Cost Per Case of 4 Gal. $144.00 FREE SHIPPING

Specifications

	.
BioMop Hose End Spray Cost $69.85 FREE SHIPPING

Bioenzymatic Cleaner for Ice and Beverage Dispenser Drain Lines

Ice and Beverage Dispenser (IBD) drain lines often clog due to the formation of “sugar snakes” in the drain lines. Sugar snakes are a rigid, hard, cellulose polymer formed by microbes feeding on the abundance of carbohydrates (sugar) from the overflow of soft drinks. The results are costly drain line backups and foul vinegar-like odors. Each year fast food restaurants, convenience stores, and other food service facilities incur expensive emergency plumbing bills to clear clogged IBD drain lines. DrainGel IBD™ is a state-of-the-art bacterial and enzymatic formulation specifically designed to remove and prevent the build-up of sugar snakes in Ice and Beverage Dispenser drain lines. The powerful DrainGel IBD™ formula rapidly breaks down cellulosic polymers such as sugar snake and other organic materials that clog the drain system. Break down and degradation of sugar snake can take place in as little as 24 hours. Regular drain cleaners and caustic bleach-based products have no effect on sugar snake (they are designed primarily for grease removal, not the break down of cellulosic polymers). Regular use of DrainGel IBD™ is a simple and cost effective way to keep Ice and Beverage Dispenser drain lines free flowing and odor free

Characteristics

. Storage and Handling Store in cool, dry place. Avoid excessive inhalation. Avoid eve contact. Wash hands thoroughly with warm, soapy water after contact. Availability 32 Fl. Oz. (1 quart) 946 ML Bottles - 12 Bottles Per Case 1qt. containers
1 (1qt. Bottle) @  $24.49 ea. FREE SHIPPING
6 (1qt. Bottle) @  $119.00 ea. FREE SHIPPING
12 (1qt. Bottle) @  $179.00 ea. FREE SHIPPING

Phorid Flies
 
Photo Credit: Tom Myers
AT A GLANCE: 
Size: 1/8 - inch 
Color: Light to dark brown 
Top of Prothorax: No markings 
Other Identifying Characters: 
Small head; sharply arched (humped) thorax

ID Tips. Phorid flies are small flies up to 1/8-inch in length including the wings. They are usually tan to dark brown in color. A key character is the severe arch or humpbacked shape of its thorax compared to its small head, thus it is also known as the humpbacked fly. The phorid fly lacks the red eyes of the fruit fly—the fly with which it is most often confused. 

Basic Biology. Phorid flies are found throughout the world and are a serious pest when found in food producing or food handling facilities. This fly breeds primarily in and feeds on moist decaying organic matter. Because it frequents such unsanitary areas, it could potentially carry diseasecausing bacteria onto food products. 
     Phorid flies are a particular concern in hospitals and other health care facilities. Phorid fly larvae have been found in open wounds of patients and in laboratory petri dishes which might result in potential contamination due to bacteria which might be found on their bodies. 
     Phorid flies develop by egg, larvae, pupa, and adult. The tiny eggs are deposited on or near the surface of decaying organic matter. The female will deposit about 20 eggs at one time, and the larvae emerge in 24 hours and feed for a number of days (8-16) depending on food and temperature. They then crawl to a drier spot to pupate. Under ideal conditions, the life cycle from egg to adult can be completed in as little as fourteen days but may take as long as 37 days. 

Key Inspection Tips. Finding the breeding sources and removing them is the key to eliminating a phorid fly infestation in a building. This is many times easier said than done. When searching for the breeding sources of phorid flies, keep in mind that the larvae can survive only in moist, decaying organic matter. The first spot that should be checked are the floor drains, if any are present. Fly larvae live in the moist film that develops on the sides of a drain and in debris which may become trapped on the edge of the drain. The presence of numerous adult flies inside a drain is a good sign that the drain is a breeding site. Use a knife or screwdriver to scrape the film off the sides of the drain and examine it for live larvae. 
    Occasionally, drain pipes will break under slab floors, and phorid flies can breed in immense numbers in the organic debris deposited through the break in the pipe under the slab. To determine if phorid flies are exiting through cracks in a floor or from a drain, place pieces of masking tape over the crack or the drain opening. Leave space between the strips of tape to allow air movement for the flies to follow. If flies are exiting the openings, some of the them will become stuck to the tape. If the suspicion is strong enough that phorid flies are breeding under a slab, a hole must be broken through the slab to see if indeed a pipe has broken and flies are breeding there. Poke around and dig in the soil under the slab. The organic debris and moist soil may actually be several inches under the surface. The presence of fly larvae and/or adults confirms the site as a breeding source. 
     Trash containers which are not cleaned regularly are another good source for phorid flies. Phorid flies will also breed in any moist, decaying organic matter trapped in cracks of kitchen equipment or under the bottom of such equipment where it meets the floor. To determine if flies are breeding below the bottom of equipment, use a knife or small spatula to scrape any debris from inside the crack. If live fly larvae are found in this debris, the crack is serving as a breeding site. 
     Flies are not always breeding near where they are found. Because they fly, the breeding source can be located in another room, on another floor, or even outside. It is common to find phorid flies breeding in or under dumpsters then making their way into the building. Don't ever assume that because fruit flies are seen in particular room that the breeding source was located there. 
     Other sites where phorid flies might be found include garbage disposals, rotting meat and vegetables, the overwatered soil of potted plants, and fresh flowers in vases. They have also been found breeding in dirty mops in janitor closets and laundry rooms, animal feces, faulty septic systems, and human cadavers. They are a common and most unwelcome pest in mortuaries, morgues, and mausoleums. In one case, an infestation was traced to a bucket of animal-based glue used in a book binding factory.
     Don't stop looking when one breeding source has been found. In most cases, several breeding sources will be present.

Moth Fly
 
Photo Credit: Tom Myers
AT A GLANCE: 
Size: 3/16 - inch 
Color: Brown to gray or gray-black 
Top of Prothorax: Hairy, no markings 
Other Identifying Characters: 
All wing veins run parallel to each other; body and wings covered by numerous short hairs

ID Tips. Moth flies are small flies up to 1/8-inch in length including the wings. They are usually black in color although at least one species found in structures has a brown body and wings. The entire body and wings of the moth fly are covered with tiny hairs giving it a moth-like appearance. 

Basic Biology. The moth fly is commonly called the drain fly because it usually is found breeding in drains which brings it into contact with potentially disease-causing bacteria. This could result in these organisms being carried onto food products or into sterile areas in hospitals. 
     Moth flies develop by complete metamorphosis. The life cycle begins when the female finds a suitable medium in which to lay her eggs. The eggs are laid on the surface of the gelatinous film inside a drain or on top of decaying organic matter. The larvae live inside the gelatinous film of the breeding material and breathe by extending a breathing tube through the film. The larvae feed for up to 15 days before pupating. The entire life cycle can be completed in as little as 8 days or as long as 24 days, depending on the temperature. 

Key Inspection Tips. Finding the breeding sources and eliminating them is the key to eliminating a moth fly infestation in a building. Since moth flies typically breed in drains, this is a good place to start the inspection. Moth fly larvae live in the moist film that develops on the sides of a drain and in the drain's trap. The presence of numerous adult flies inside a drain is a good sign that the drain is a breeding site. Use a knife or screwdriver to scrape the film off the sides of the drain and examine it for live larvae. 
     Occasionally, drain pipes will break under slab floors or between floors in commercial buildings. Moth flies can breed in large numbers in the organic debris deposited through the break in the pipe under the slab. Adult flies then enter the living space above the slab through cracks in the slab and back through the drain pipe. To determine if these flies are exiting through cracks in a floor or from a drain, place pieces of masking tape over the crack or the drain opening. Leave space between the strips of tape to allow air movement for the flies to follow. If flies are exiting the openings, some of the them will become stuck to the tape. If the suspicion is strong enough that moth flies are breeding under a slab, a hole must be broken through the slab to see if indeed a pipe has broken and flies are breeding there. After a hole is broken through the slab, poke around and dig in the soil under the slab. The organic debris and moist soil may actually be several inches under the surface. The presence of fly larvae and/or adults confirms the site as a breeding source. 
     Sump pump pits and sewers are usually found in a basement area and also prime breeding sites for moth flies. Sump pump pits and sewers should be checked for activity even if they are not located close to the area where flies are seen. The flies might not always be breeding close to the infestation area. 
    In homes, moth flies are generally found breeding in bathroom drains, particularly those in showers. Shower pans are prone to leaking and the area under the shower pan becomes a prime moth fly breeding source. If suspicion is strong that flies are breeding beneath a shower, it may be necessary to drill a hole into the area under the shower pan or the wall behind the shower. In most cases where moth flies are breeding in this area, adult flies will begin emerging from the hole within minutes. Moth flies are strongly attracted to light and will fly to the hole drilled through the wall. 
     Moth flies will also breed inside crawlspaces. In many of the cases where this occurs, a drain pipe is leaking into the crawlspace. Inspect the crawlspace if one is present and look for adult flies. Check spider webs for dead moth flies if live ones are not seen in the crawlspace. 
     Don't stop looking when one breeding source has been found. In most cases, several breeding sources will be present.

Courtesy of Pest Control Technology